System description
1. True color touch screen design, human-computer interaction
2. Four-channel/two-channel (optional) data acquisition
3. panel mount
4. Wide voltage power supply design
5. Various output interface configurations
6. Data storage backup
application | Various rotating mechanical equipment such as fans, water pumps, motors, compressors, coal mills, gearboxes, etc. | ||||||||
overview | The device is a new generation of intelligent products based on the integration of sensor technology, new signal processing technology, interrupt technology, and human-computer interaction technology. It adopts a four-way or two-way synchronous monitoring mode to effectively monitor the operating conditions of the equipment, and extract the relevant data from the characteristic parameters, the unit status data, and complete the early warning and alarm of the unit failure. It can establish a set of rigorous vibration monitoring, diagnosis and analysis system for the equipment. By continuously monitoring the important state parameters of the equipment operation, it can keep abreast of the operation status of the equipment, provide important data for the pre-diagnosis of accident signs, and provide reliable information for the operation of the equipment. protection. | ||||||||
Product number | VMS4110E shaft vibration | VMS4130E Swing | VMS4120E bearing vibration | VMS4121E bearing vibration | VMS4122E bearing vibration | ||||
Signal | |||||||||
input signal type | φ8mm eddy current sensor | φ8mm eddy current sensor | Magnetic speed sensor | Piezoelectric Accelerometer | piezoelectric speed sensor | ||||
Measurement parameters | Amplitude (pp) | Amplitude (pp), Intensity ( Trms ) | |||||||
input channel | Four-channel/two-channel (optional) | ||||||||
measurement accuracy | ±1%FS@25℃ | ||||||||
Frequency Range | 2~500Hz±3dB | 0.5~100Hz | 10~300Hz | 10~1000Hz | 10~1000Hz | ||||
Measuring range: | Amplitude (1~500μm user defined) | Amplitude (1~500μm user defined), intensity (1~50.0mm/s user defined) | |||||||
Sensor power supply | -24Vdc isolation | -24Vdc isolation | No power supply (voltage input) | 4.0mA±10%, +24Vdc isolation | 4.0mA±10%, +24Vdc isolation | ||||
output | |||||||||
4~20mA current | Large load 750Ω, ±0.1%FS@25℃ | ||||||||
relay | 5A/30Vdc or 5A/250Vac SPST dry junction | ||||||||
Synchronization signal output | Vibration: sensor original signal, output impedance 100Ω, maximum transmission distance 300 meters | ||||||||
communication method | RS485, communication protocol MODBUS RTYU | ||||||||
USB interface | Support external U disk data storage, backup | ||||||||
Call the police | |||||||||
series | 2 levels of alarm for each channel | ||||||||
time delay | 0~250s, with an interval of 1s | ||||||||
alarm value | Custom | ||||||||
alarm logic | ≥ | ||||||||
environment | |||||||||
operating temperature | -30℃~+65℃ | ||||||||
stored temperature | -40℃~+85℃ | ||||||||
humidity | ≤90%, non-condensing | ||||||||
Exterior | |||||||||
show | 4.3 inch TFT true color touch screen, LED backlight | ||||||||
Dimensions | 138mm×106mm×140mm (L×H×D) | ||||||||
Hole Size | 125mm×99mm ( l×h ) | ||||||||
installation method | Disc | ||||||||
powered by | |||||||||
supply voltage | See selection for details | ||||||||
power consumption | ≤10W | ||||||||
ordering information | |||||||||
order number | Power A | function name | describe | ||||||
VMS4110E-Ax | 00: Power supply AC85~265V/50-400Hz 01: Power supply DC+24V | shaft vibration | Equipped with φ8mm eddy current sensor | Four channels* | |||||
VMS4120E-Ax | bearing vibration | With magnetoelectric speed sensor | |||||||
VMS4121E-Ax | bearing vibration | With piezoelectric acceleration sensor | |||||||
VMS4122E-Ax | bearing vibration | With piezoelectric speed sensor | |||||||
VMS4130E-Ax | swing | Equipped with φ8mm eddy current sensor | |||||||
VMS4110DE-Ax | shaft vibration | Equipped with φ8mm eddy current sensor | dual channel | ||||||
VMS4120DE-Ax | bearing vibration | With magnetoelectric speed sensor | |||||||
VMS4121DE-Ax | bearing vibration | With piezoelectric acceleration sensor | |||||||
VMS4122DE-Ax | bearing vibration | With piezoelectric speed sensor | |||||||
VMS4130DE- Ax | swing | Equipped with φ8mm eddy current sensor | |||||||
Attachment 1: Mounting Fixtures | |||||||||
order number | describe | ||||||||
VMS600207 | Fixtures for fixing instruments | ||||||||