application | Hydrogenerator sets, gearboxes, water pumps | |
VMS8000C/05 frame module | ||
Dimensions | 500mm×271mm×316mm (L×H×D) | |
Hole Size | 467mm×250mm | |
installation method | Disc | |
VMS8000C/90 Power Module | ||
input power | (1) 90~264VAC/47~63Hz (2) 120~370VDC | |
show | Green OK light | |
Provide power for the entire system and modules | ||
VMS8000C/02S system interface module | ||
output impedance | 150Ω | |
key phase signal input | (1) Input impedance: >20KΩ (2) Input frequency: <99,999 rpm (3) 1~255 pulses/period (4) Eddy current probe: ≥0.0167Hz (1rpm) 4 (5) Magnetic sensor: ≥3.3Hz(200rpm) | |
LCD display | 4.3 inches TFT true color display | |
Modbus communication | RS485: 1, on the rear panel. | |
VMS8000C/40-Axx Relay Module | ||
road number | 20 road | |
relay | Dielectric: Epoxy, Capacity: 2A/240VAC or 2A/24VDC, Relay Type: SPTD | |
insulation | 1000VDC | |
LED display | Alarm: red | |
VMS8000C/10-Axx Eddy Current Module | ||
input signal | Accept 4 eddy current sensor signals | |
input resistance | >20KΩ | |
Frequency response | Radial vibration: (1) Frequency response: 4~4.0KHz (240~240,000rpm), ±3dB (2) Accuracy: <±1%FS @25℃ Swing (low frequency): (1) Frequency response: 0.5~100Hz (30~1,200rpm), ±3dB (2) Accuracy: <±1%FS @25℃ | |
precision | <±1%FS@25℃ | |
4~20mA current | Large load 750Ω, ±0.1%FS@25℃ | |
buffered output | The front panel has a BNC original signal buffer output connector | |
output impedance | 150Ω | |
sensor power supply | -24VDC, current limiting; each channel current is less than 50mA | |
Call the police | Alarm point setting: Each channel has two alarm points, which can be adjusted from 0 to 100% of full scale. | |
LED display | (1) OK: green, on, off (2) BYPASS: Red | |
VMS8000C/20-Axx vibration module | ||
Constant current source sensor power supply | Constant current source: 4.0mA@25℃ | |
input signal | Accepts 4 displacement, velocity or acceleration sensor signals | |
input resistance | >20KΩ | |
Frequency response | (1) Acceleration: 4~4.0KHz (240~240,000rpm) (2) Speed: 2~2.0KHz (120~120,000rpm) | |
low frequency response | (1) Acceleration: 0.5~100.0Hz (30~6,000rpm) (2) Speed: 0.5~100.0Hz (30~6,000rpm) | |
precision | <±1%FS@25℃ | |
4~20mA current | Large load 750Ω, ±0.1%FS@25℃ | |
signal processing | (1) peak (peak) / (2) peak-peak (peak-peak) / (3) RMS | |
buffered output | The front panel has a BNC original signal buffer output connector | |
output impedance | 150Ω | |
Call the police | Alarm point setting: Each channel has two alarm points, which can be adjusted from 0 to 100% of full scale. | |
LED display | (1) OK: green, on, off (2) BYPASS: Red | |
VMS8000C/50-Axx speed module | ||
input signal | Eddy current sensor and magnetoresistive sensor | |
input resistance | >20KΩ | |
precision | ±1rpm | |
4~20mA current | Large load 750Ω, ±0.1%FS@25℃ | |
buffered output | The front panel has a BNC original signal buffer output connector | |
Call the police | Alarm point setting: Each channel has two alarm points, which can be adjusted from 0 to 100% of full scale. | |
LED display | (1) OK: green, on, off (2) BYPASS: Red | |
Environmental indicators | ||
operating temperature | -30℃~+65℃ | |
Storage temperature | -40℃~+85℃ | |
Relative humidity | to 90%, non-condensing | |
ordering information | ||
order number | options | |
Frame 8000C/05-Axx | 0 0 default | |
power module 8000C/90-Axx-Bxx | A: Power supply type (upper card slot) | 0 1 90~264VAC/47~63Hz 0 2 120~370VDC |
B: Power supply type (lower card slot) | 0 0 No power supply (when redundant power supply is not required) 0 1 90~264VAC/47~63Hz 0 2 120~370VDC | |
Framework interface module 8000C/02S-Axx | A: System interface | |
0 1 Ethernet TCP/IP0; 02 RS-485 Modbus RTU0; 03 2-way key phase input | ||
Eddy Current Module 8000C/10-Axx | A: I/O module type | 0 0 Standard I/O module |
Vibration Module 8000C/20-Axx | A: Supporting sensor type | |
0 1 Vibration speed sensor; 0 2 Piezoelectric speed sensor 0 3 Piezoelectric acceleration sensor; 0 4 Low frequency vibration sensor | ||
Speed Module 8000C/50-Axx | A: I/O module type | 0 0 Standard I/O module |
Temperature Monitoring Module 8000C /30-Axx | A: I/O module type | 0 1 RTD 0 2 TC |
Overspeed Monitoring System 8000C /53-Axx | A: Channel option | 0 3 Three-channel system |
Stroke Monitoring Module 8000C /60-Axx | A: I/O module type | 0 0 Standard I/O module |
Process monitoring module 8000C /62-Axx | A: I/O module type | 0 1 -10~+10Vdc 0 2 4~20mA |
Relay Module 8000C /40-Axx | A: I/O module type | 0 0 Standard I/O module |