Overview
VMS701 piezoelectric acceleration sensor is used in the vibration of key rotating machinery (relative to free surface) that requires the measurement of housing acceleration, such as displacement, velocity, acceleration, etc. It is more suitable for monitoring the damage of bearings or gearboxes. The integrated circuit technology (VLSI) and ICP-type enhanced anti-interference design adopted by the sensor make the sensor highly integrated, which greatly improves the stability and reliability of the sensor; it adopts crystal circuit, no moving parts, and no wear and tear and degradation. It has a long service life and can be installed vertically, horizontally or at any angle. The circuit is completely isolated from the shell, avoiding the noise problem caused by multi-point grounding that often occurs in the field. The wide frequency band design makes the frequency range of VMS701 piezoelectric acceleration sensor almost include the rotational speed of rotating machinery and its higher harmonics. High performance allows it to be applied to rotating machinery in harsh industrial environments.
Technical Parameters
Electrical | Environment Physical |
Ordering information
Master part 1: Probe
order number | describe |
VMS701 | The sensor output connector is a 2-pin MIL socket |
Note: The required items of the sensor include: [main part 1: probe, accessory 1: connection cable, accessory 2: installation conversion base and accessory 3: installation bolt].
Accessory 1: Connection cable
order number | Cable length A | Other B | describe |
VMS600901-Ax-Bxx | Range: Example: A2.5 = cable length 2.5 meters. | 00: no requirement | 2-pin MIL-C-5015 plug with x m 2-core shielded stranded wire cable, diameter 4mm, <120°C. |
VMS600801-Ax-Bxx | 2-pin MIL-C-5015 plug with x m 2-core shielded twisted-wire armored cable, diameter 8mm, <150°C. | ||
VMS600701-Ax-Bxx | 2-pin MIL-C-5015 plug (right angle), with x m 2-core shielded stranded armored cable, diameter 8mm, <150°C. < p=""> | ||
VMS600601-Ax-Bxx | 2-pin MIL-C-5015 sealed plug with x m 2-core shielded stranded wire cable, diameter 4mm, <120°C. |
Attachment 2: Install the conversion base (standard configuration)
order number | describe |
VMS600902 | Including 1/4-28UNF to M8×1 mounting bolts |
Attachment 3: Mounting Bolts
order number | describe |
VMS602103 | M6×1 |
VMS602203 | M8×1 |
VMS602303 | M10×1 |
VMS602403 | M10×1.5 (default) |
VMS602503 | 1/4-28UNF |
Notes: Mounting Bolt Length: 9mm