![](/en/static/images/pp1.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp1.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp2.gif)
![](/en/static/images/pp1.gif)
![](/en/static/images/pp1.gif)
![](/en/static/images/pp1.gif)
application | Housing vibration of bearing unit | ||||
electric | |||||
sensitivity | 10.2 mV/m/s2 (100mV/g ) ±5% (25°C, 80Hz) | ||||
Acceleration range | 50g | ||||
Amplitude linear | ±1%FS | ||||
response frequency | 0.5-15KHz (±3.0dB) | ||||
Resonance frequency | 26KHz | ||||
Lateral Sensitivity | 5% | ||||
Transmission distance | 305 meters long | ||||
DC bias voltage | 12V | ||||
Power supply voltage | 18-30Vdc | ||||
Power constant current | 2-10mA | ||||
electronic noise | 10μV rms (2Hz-20KHz) | ||||
output impedance | <100ω | ||||
grounding | Shell insulated, internally shielded | ||||
environment | |||||
operating temperature | -40℃~+120℃ | ||||
humidity | ≤100% non-condensing, non-immersion | ||||
degree of protection | IP67 | ||||
Shock limit | 5000g peak | ||||
physics | |||||
weight | 100g | ||||
shell material | Stainless steel | ||||
Output connector form | MIL-C-5015, 2 pins (A: Signal, B: Common) | ||||
Mounting aperture | see selection | ||||
Mounting torque | 3N*m | ||||
diameter | 1 inch (25.4mm) | ||||
appendix | Cable, Mounting Adapter, Mounting Bolts | ||||
illustrate | Suitable for low speed equipment occasions | ||||
ordering information | |||||
VMS 707 low frequency acceleration sensor | |||||
probe | order number | describe | |||
VMS707 | The sensor output connector is a 2-pin MIL socket | ||||
connection cable | order number | Cable length A | Other B | describe | |
VMS600901-Ax-B00 | scope: 1m≤A≤300m, 0.5m increment, default 3m. For example: A2.5 = cable length 2.5 meters. | 00: no requirement | 2-pin MIL-C-5015 plug with x m 2-core shielded stranded wire cable, diameter 4mm, <120°C. | ||
VMS600801-Ax-B00 | 2-pin MIL-C-5015 plug with xm 2-core shielded stranded armored cable, diameter 7mm, <150℃< p=""> | ||||
VMS600701-Ax-B00 | 2-pin MIL-C-5015 plug (right angle), with x m 2-core shielded stranded armored cable, diameter 7mm, <150°C. | ||||
VMS600601-Ax-B00 | 2-pin MIL-C-5015 sealed plug with x m 2-core shielded stranded wire cable, diameter 4mm, <120°C. | ||||
Attachment 1: Install conversion base (standard configuration) | |||
order number | VMS600902 | Including 1/4-28UNF to M8×1 mounting bolts | |
Attachment 2: Mounting Bolts | |||
order number | VMS602103 | Thread M6×1 | Mounting bolt length: 9mm |
VMS602203 | Thread M8×1 | ||
VMS602303 | Thread M10×1 | ||
VMS602403 | Thread M10×1.5 (default) | ||
VMS602503 | Thread 1/4-28UNF |