application | Housing vibration of bearing unit | |||
Product number | VMS 707Y integrated low frequency acceleration sensor | |||
electric | ||||
sensitivity | 10.2 mV/m/s2 (100mV/g ) ±5% (25°C, 80Hz) | |||
Acceleration range | 50g | |||
Amplitude linear | ±1%FS | |||
response frequency | 0.5-15KHz (±3.0dB) | |||
Resonance frequency | 26KHz | |||
Lateral Sensitivity | 5% | |||
Transmission distance | 305 meters long | |||
DC bias voltage | 12V | |||
Power supply voltage | 18-30Vdc | |||
Power constant current | 2-10mA | |||
electronic noise | 10μV rms (2Hz-20KHz) | |||
output impedance | <100ω | |||
grounding | Shell insulated, internally shielded | |||
environment | ||||
operating temperature | -40℃~+120℃ | |||
humidity | ≤100% non-condensing, non-immersion | |||
degree of protection | IP68 | |||
Shock limit | 5000g peak | |||
physics | ||||
weight | 120g | |||
shell material | Stainless steel | |||
Output connector form | Two-core wire (blue: signal, white: common) | |||
Mounting aperture | see selection | |||
Mounting torque | 3N*m | |||
diameter | 1 inch (25.4mm) | |||
appendix | Installing the conversion base and mounting bolts | |||
illustrate | Integrated design, low frequency, waterproof | |||
ordering information | ||||
VMS 707Y integrated low frequency acceleration sensor | ||||
sensor | order number | Cable length A | Cable armor option B | |
VMS707Y-Ax-B01 | scope: 1m≤A≤300m, 0.5m increment, default 3m. For example: A2.5 = cable length 2.5 meters. | 01: With x m 2-core shielded twisted wire (22 AWG) cable, diameter 4mm, <120°C. | ||
VMS707Y-Ax-B02 | 02: Armored cable with xm 2-core shielded twisted wire (22 AWG), diameter 7mm, <150°C. | |||
Attachment 1: Install conversion base (standard configuration) | ||||
order number | VMS600902 | Including 1/4-28UNF to M8×1 mounting bolts | ||
Attachment 2: Mounting Bolts | ||||
order number | VMS602103 | Thread M6×1 | Mounting bolt length: 9mm | |
VMS602203 | Thread M8×1 | |||
VMS602303 | Thread M10×1 | |||
VMS602403 | Thread M10×1.5 (default) | |||
VMS602503 | Thread 1/4-28UNF | |||