System specification
1. Establishing an inspection plan measurement parameter sequence for data collection
2. Download the inspection plan sequence to the instrument
3. Acquire magnitude, spectrum, time-domain waveform and phase data
4. Upload inspection data and temporary measurement data directly from the instrument to a PC
5. Various collected signals can be directly analyzed and browsed on the instrument
overview | The new generation of on-site test and analysis system developed by integrating embedded computer technology, measurement and control technology and knowledge is an ideal tool for on-site maintenance, detection and diagnosis applications. It is a wide-range analysis function for data acquisition, information processing, display and storage in the industrial field. It can be used as a stand-alone instrument, or the measured value can be uploaded to the application software for analysis. |
Technical Parameters | |
Signal | |
input signal type | Acceleration sensor, speed sensor, buffer signal |
measurement definition | Acceleration (op), Intensity (Trms), Amplitude (pp), Phase |
Signal | True RMS, Peak, Peak-to-Peak, True Peak, True Peak-to-Peak |
Dynamic Range | >96dB typical |
refresh rate | 40KHz |
A/D accuracy | 16 bits |
FFT resolution | 400~25600 lines |
Sample length | 256~65536 points |
analysis frequency | 18Hz~75.3KHz (no integration), 0.36Hz~75.3KHz (integration) |
input channel | 2 channels |
Exterior | |
Dimensions | 194×112×40mm(L×W×H) |
show | TFT color LCD screen, 320×240, with backlight |
weight | 800g |
powered by | |
PC communication | USB from RS232 serial port |
powered by | Rechargeable Li-ion pack |
degree of protection | IP65 |
environment | |
operating temperature | -30℃~+65℃ |
stored temperature | -40℃~+85℃ |
humidity | ≤85%, non-condensing |
ordering information | |
order number | VMS5300/B |
Accessory selection | |
VMS5300/B-EN01 | connecting cables |
VMS5300/B-EN02 | charging adapter |