System specification
• Establish inspection plan measurement parameter sequences for data collection
• Download inspection plan sequences to the instrument
• Acquire magnitude, spectrum, time-domain waveform and phase data
• Upload inspection data and temporary measurement data directly from the instrument to a PC
• Various collected signals can be directly analyzed and browsed on the instrument
parameter name | describe |
input signal type | Acceleration sensor, speed sensor, buffer signal |
measurement definition | Acceleration, Velocity, Displacement, Phase |
Signal | True RMS, Peak, Peak-to-Peak, True Peak, True Peak-to-Peak |
Dynamic Range | >96dB typical |
refresh rate | 40KHz |
Data Accuracy | 16 A/D |
FFT resolution | 400~25600 |
Sample length | 256~65536 |
analysis frequency | 0.18Hz~75.3KHz (no integration), 0.36Hz~75.3KHz (integration) |
input channel | 2 channels |
Exterior | |
Dimensions | 194×112×40mm(W×H×D) |
show | TFT color LCD screen, 320×240, with backlight, touch screen handwriting input |
weight | 800g |
diameter | 1 inch(25.4mm) |
powered by | |
powered by | Rechargeable Li-ion pack |
degree of protection | IP65(Dustproof and waterproof) |
PC communication | USB from RS232 serial port |
environment | |
Relative humidity | ≤80% |
appendix | Connection cable, charging adapter |
Order Guide
order number | Accessory selection A |
JM-B-6C/N-A | 1: Connect the cable 2: Charging adapter |
Note: This selection is an independent selection of accessories, which is included with the standard configuration of the portable vibration analyzer.